BOLL Rust Converter 250ml Anticorrosive + Free Brush Cup Gloves Korten
£9.00
VAT included
5907588406093
Free delivery for orders over £50 (UK) & over 100€ (Ireland)
We are the car body painting accessory distributor in UK and Ireland. We are based in Northern Ireland.
We have high stock of all products so are able to prepare large wholesale orders for car painting garages anywhere in the UK and Ireland.
For any large orders or wholesale orders - please contact us.
PROPERTIES:
It is a product based on high quality epoxy resins. Thanks to its formulation it has excellent priming and anticorrosive properties. At the same time it serves as a primer and a base for subsequent coats, which can be various types of paints, varnishes and polyester putties. It has a wide variety of applications and can be applied directly to rust. Actively works on rust with the formation of blocking organic iron compounds and a protective epoxy coating against corrosion.
COLOUR:
amber
PHYSICAL PROPERTIES:
It is a product based on high quality epoxy resins. Thanks to its formulation it has excellent priming and anticorrosive properties. At the same time it serves as a primer and a base for subsequent coats, which can be various types of paints, varnishes and polyester putties. It has a wide variety of applications and can be applied directly to rust. Actively works on rust with the formation of blocking organic iron compounds and a protective epoxy coating against corrosion.
COLOUR:
amber
PHYSICAL PROPERTIES:
- Viscosity: min. 30sec. Ford4
- Dust dry: approx. 20 min. at temp. 20°C
- Density: 0,930 g/cm3
- Application temperature: 10-25°C/ relative humidity 45-60%
METHOD OF USE:
Remove mechanically loose rust fragments, clean, degrease with "BOLL Silicone remover" and then dry the covered surface. Shake the container for about 2 minutes before use. Depending on the degree of corrosion, it is recommended to apply 3 - 4 layers of the product using a brush, roller or spray gun. Can be painted with most paints and topcoats after 12 hours at a temp. ambient 20°C. It is recommended to carry out a test to check the compatibility of the product in a given application.
SHELF LIFE:
Two years from the date of production on the packaging.
Remove mechanically loose rust fragments, clean, degrease with "BOLL Silicone remover" and then dry the covered surface. Shake the container for about 2 minutes before use. Depending on the degree of corrosion, it is recommended to apply 3 - 4 layers of the product using a brush, roller or spray gun. Can be painted with most paints and topcoats after 12 hours at a temp. ambient 20°C. It is recommended to carry out a test to check the compatibility of the product in a given application.
SHELF LIFE:
Two years from the date of production on the packaging.
STORAGE CONDITIONS:
Protect the product from excessive heat and cold. Avoid direct exposure to sunlight. Store in a dry place.
OTHER INFORMATION:
All technical data are approximate values. We advise you to test the material to ensure suitability for your specific application. The producer reserves the right to improve the product and change the technical conditions with the possibility of making changes inside the specification.
Protect the product from excessive heat and cold. Avoid direct exposure to sunlight. Store in a dry place.
OTHER INFORMATION:
All technical data are approximate values. We advise you to test the material to ensure suitability for your specific application. The producer reserves the right to improve the product and change the technical conditions with the possibility of making changes inside the specification.
16 other products in the same category:
