6x Underseal BOLL 1L black car body schutz 1000ml protect + gun
£50.00
VAT included
5907588460019
Free delivery for orders over £50 (UK) & over 100€ (Ireland)
We are the car body painting accessory distributor in UK and Ireland. We are based in Northern Ireland.
We have high stock of all products so are able to prepare large wholesale orders for car painting garages anywhere in the UK and Ireland.
For any large orders or wholesale orders - please contact us.
BOLL UNDERBODY COATING + GUN
6pcs x 1L
PROPERTIES:
This bitumen and rubber-based underbody preservative forms a flexible layer that perfectly protects the car underbody against stone chips, salt, water and mechanical damage. It is resistant to road salt and industrial fumes. The product also acts as a sound absorber.
COLOUR:
Black
METHOD OF USE:
The underbody preservative can be easily applied by BOLL universal spray gun. Thoroughly clean, degrease and then dry the surface. Cover adjacent areas with masking materials. Shake the container well for about 3 minutes before use. Best results are achieved at a pressure of 3 to 6 bar.
This bitumen and rubber-based underbody preservative forms a flexible layer that perfectly protects the car underbody against stone chips, salt, water and mechanical damage. It is resistant to road salt and industrial fumes. The product also acts as a sound absorber.
COLOUR:
Black
METHOD OF USE:
The underbody preservative can be easily applied by BOLL universal spray gun. Thoroughly clean, degrease and then dry the surface. Cover adjacent areas with masking materials. Shake the container well for about 3 minutes before use. Best results are achieved at a pressure of 3 to 6 bar.
SURFACE:
INFORMATION:
Do not spray toward engine, transmission, brake parts or exhaust system. CAN NOT BE VARNISHED.
PHYSICAL PROPERTIES:
Density (at 20°C): 1,05 g/cm3
- two-component acrylic primer - apply varnish or control powder. After sanding, blow, degrease with "BOLL silicone remover" and then apply another coat.
- epoxy primer - can be used to isolate materials. After sanding, blow, degrease with "BOLL silicone remover" and then apply another coat.
- polyester putties - sand, blow and degrease with "BOLL Silicone remover" and then apply the next coat.
INFORMATION:
Do not spray toward engine, transmission, brake parts or exhaust system. CAN NOT BE VARNISHED.
PHYSICAL PROPERTIES:
Density (at 20°C): 1,05 g/cm3
EQUIPMENT CLEANING:
Wash the gun with nitrocellulose solvent (Nitro) or white spirit.
STORAGE CONDITIONS:
Protect the product from excessive heat and cold. Avoid direct exposure to sunlight. Store in a dry place.
SHELF LIFE:
Two years from the date of production on the packaging.
OTHER INFORMATION:
All technical data are approximate values. We advise you to test the material to ensure suitability for your specific application. The producer reserves the right to improve the product and change the technical conditions with the possibility of making changes inside the specification.
Wash the gun with nitrocellulose solvent (Nitro) or white spirit.
STORAGE CONDITIONS:
Protect the product from excessive heat and cold. Avoid direct exposure to sunlight. Store in a dry place.
SHELF LIFE:
Two years from the date of production on the packaging.
OTHER INFORMATION:
All technical data are approximate values. We advise you to test the material to ensure suitability for your specific application. The producer reserves the right to improve the product and change the technical conditions with the possibility of making changes inside the specification.
16 other products in the same category:
-30%
