BOLL Polyester Resin Repair Kit Hardener Glass Mat

PROPERTIES:
BOLL repair kit consists of polyester resin (242 g), hardener (8 g) and glass mat (0,25 m2). It is used both for filling significant material defects in car bodies, boats, trailers, etc. as well as for strengthening and stiffening the construction of repaired elements. The resin has very good adhesion to metal, plastic surfaces, steel, glass, wood and concrete. It is resistant to temperatures up to 80°C, weather conditions, gasoline, lubricants, oils, diluted acids and alkalis. It is characterized by high elasticity and short curing time. After hardening, it has very high mechanical strength, can be sanded and covered with any polyester putties.

COLOUR:
yellowish

SURFACE:

• steel - sand, blow off and degrease with “BOLL Silicone remover”, then apply another coat.
• aluminium - sand, blow off and degrease with “BOLL Silicone remover”, then apply another coat.
• old paint coating, acrylic primers, epoxy primers - sand with P150 – P240, blow off and degrease with “BOLL Silicone remover”, then apply another coat.
• polyester laminates - sand with P80 - P120, blow off and degrease with “BOLL Silicone remover”, then apply another coat.
• plastics - sand with P120, blow off and degrease with “BOLL Silicone remover”, and then apply another coat.

INFORMATION:
Do not apply the resin directly to reactive primers (wash primers), one-component acrylic and nitrocellulose products. Do not add the remaining resin/hardener mixture into the can.

PHYSICAL PROPERTIES:

• Density at 20°C: 1,06 – 1,16 g/cm
• Temperature of use: +10°C – +25°C

CLEANING:
Wash immediately after application with thinner for nitrocellulose products (Nitro) or for acrylic products.

STORAGE CONDITIONS:
Protect the product from excessive low and high temperatures. Avoid direct exposure to sunlight. Store in dry places.

SHELF LIFE:
12 month from the production date placed on the package.

OTHER INFORMATION:
All technical data are approximate values. We advise you to test the material to ensure its suitability for a specific application. The producer reserves the right to improve the product and change the technical conditions with the possibility of making changes inside the specifications.