Rust Converter Spray BOLL 400ml Aerosol Rust Stop Primer
£7.80
VAT included
5907588406086
Free delivery for orders over £50 (UK) & over 100€ (Ireland)
We are the car body painting accessory distributor in UK and Ireland. We are based in Northern Ireland.
We have high stock of all products so are able to prepare large wholesale orders for car painting garages anywhere in the UK and Ireland.
For any large orders or wholesale orders - please contact us.
BOLL rust convertor - spray
400ml
PROPERTIES:
It is a product based on high quality epoxy resins. Thanks to its formulation it has excellent priming and anticorrosive properties. It serves as a primer and a base for subsequent coats, which can be various types of paints, varnishes and polyester putties. It has a wide variety of applications and can be applied directly to rust. Actively works on rust, creating organic iron compounds that block corrosion and a protective epoxy coating.
COLOUR:
Amber
It is a product based on high quality epoxy resins. Thanks to its formulation it has excellent priming and anticorrosive properties. It serves as a primer and a base for subsequent coats, which can be various types of paints, varnishes and polyester putties. It has a wide variety of applications and can be applied directly to rust. Actively works on rust, creating organic iron compounds that block corrosion and a protective epoxy coating.
COLOUR:
Amber
METHOD OF USE:
Remove loose fragments of rust, clean, degrease and then dry the surface. Before use, shake the container for approx. 3 minutes. Apply in 2-3 layers from 20-30 cm distance. Can be painted with most paints and topcoats after 6 hours at a temp. 20°C. We recommend to test the suitability of the product in a given application.
PHYSICAL PROPERTIES:
Physical state: aerosol
Density (at 20°C): 0,794 g/cm3
Drying time: 6h at 20°C
Application temperature: 10 ÷ 25°C
Remove loose fragments of rust, clean, degrease and then dry the surface. Before use, shake the container for approx. 3 minutes. Apply in 2-3 layers from 20-30 cm distance. Can be painted with most paints and topcoats after 6 hours at a temp. 20°C. We recommend to test the suitability of the product in a given application.
PHYSICAL PROPERTIES:
Physical state: aerosol
Density (at 20°C): 0,794 g/cm3
Drying time: 6h at 20°C
Application temperature: 10 ÷ 25°C
STORAGE CONDITIONS:
Protect the product from excessive heat and cold. Avoid direct exposure to sunlight. Store in a dry place.
SHELF LIFE:
Two years from the production date on the packaging.
OTHER INFORMATION:
All technical data are approximate values. We advise you to test the material to ensure suitability for your specific application. The producer reserves the right to improve the product and change the technical conditions with the possibility of making changes inside the specification.
Protect the product from excessive heat and cold. Avoid direct exposure to sunlight. Store in a dry place.
SHELF LIFE:
Two years from the production date on the packaging.
OTHER INFORMATION:
All technical data are approximate values. We advise you to test the material to ensure suitability for your specific application. The producer reserves the right to improve the product and change the technical conditions with the possibility of making changes inside the specification.
16 other products in the same category:
