12 X BOLL PLASTIC PRIMER SPRAY AEROSOL PP400 400ML

Single-component, quick-drying plastic primer spray

This high-quality, single-component aerosol primer is specially designed to improve adhesion between plastic surfaces and the top coat of paint. Thanks to its fast-drying formula, it significantly simplifies and accelerates the preparation process for painting.

Its flexibility makes it an ideal bonding layer before painting elastic automotive parts such as:

• bumpers,

• spoilers,

• side moldings,

• mirror housings,

• and other plastic components.

The product creates a thin, even layer that enhances the adhesion of subsequent paint coatings, prevents flaking, and increases the durability of the final finish.

Key features:

• excellent adhesion to plastic surfaces,

• flexible structure – resists cracking caused by surface movement,

• fast drying – saves time during the process,

• easy spray application,

• improves the longevity and appearance of paint layers.

This primer is an essential part of the preparation process for painting plastic parts, suitable for both professional and DIY use.

• • Preparation of the surface: Thoroughly clean the plastic surface from dirt, grease, oil, silicone, wax and other contaminants. We recommend using a dedicated plastic cleaner or degreaser.

  • Sanding (if necessary): For better adhesion, lightly sand the surface with fine-grit sandpaper (e.g. P600–800) and then remove dust.

  • Shake the can: Shake the aerosol vigorously for about 2–3 minutes to ensure proper mixing of the product.

  • Test spray: Before applying to the target surface, perform a short test spray on a non-visible area to check compatibility and spray pattern.

  • Application: Spray a thin and even layer from a distance of approx. 20–30 cm. Apply 1–2 light coats. Avoid heavy spraying to prevent runs or drips.

  • Drying time: Let the primer dry for approx. 10–15 minutes at room temperature before applying further paint layers.

  • Overcoating: Once fully dry, the surface is ready to be painted with acrylic, synthetic or other compatible paints.

  • Cleaning the nozzle (optional): After use, turn the can upside down and spray for 2–3 seconds to clear the nozzle and prevent clogging.