Filler BOLL Kit Bumper Fix 500g bumper putty professional car repair
£4.82
VAT included
5907588404600
Free delivery for orders over £50 (UK) & over 100€ (Ireland)
We are the car body painting accessory distributor in UK and Ireland. We are based in Northern Ireland.
We have high stock of all products so are able to prepare large wholesale orders for car painting garages anywhere in the UK and Ireland.
For any large orders or wholesale orders - please contact us.
BOLL PUTTY FOR PLASTICS
Polyester putty used to fill cavities in all kinds of plastic. It is ideal for manual and mechanical grinding. It has an extremely high flexibility and very good adhesion to surfaces made of plastic.
PROPERTIES:
Polyester putty used for filling defects in various plastics (except polyethylene and Teflon). Ideally suited for manual and mechanical sanding. It has extremely high flexibility and excellent adhesion to plastic elements such as bumpers, spoilers, mirror housings, moldings and fenders.
COLOUR:
dark grey
Polyester putty used to fill cavities in all kinds of plastic. It is ideal for manual and mechanical grinding. It has an extremely high flexibility and very good adhesion to surfaces made of plastic.
PROPERTIES:
Polyester putty used for filling defects in various plastics (except polyethylene and Teflon). Ideally suited for manual and mechanical sanding. It has extremely high flexibility and excellent adhesion to plastic elements such as bumpers, spoilers, mirror housings, moldings and fenders.
COLOUR:
dark grey
SURFACE:
In order to improve adhesion on plastics, we recommend to apply "BOLL SPRAY" primer for plastics before application of putty on plastic elements.
INFORMATION:
The putty should not be applied directly on wash primers or one-component acrylic and nitrocellulose products. The putty should not be applied on materials made of polyethylene (PE) and Teflon (PTFE).
- steel - degrease, grind, blow, and degrease again with "BOLL Silicone remover", then apply another coat.
- aluminium - degrease, sand down, blow, and degrease again with "BOLL Silicone remover", then apply another coat.r
- old paint coatings - sand with P220-P280, blow, and degrease with "BOLL Silicone remover", and then apply the next coat.
- two-component acrylic primer - sand with P220-P280, blow, and degrease with "BOLL silicone remover", and then apply the next coat.
- polyester laminates - sand with P80-P120, blow, and degrease with "BOLL Silicone remover", then apply another coat.
In order to improve adhesion on plastics, we recommend to apply "BOLL SPRAY" primer for plastics before application of putty on plastic elements.
INFORMATION:
The putty should not be applied directly on wash primers or one-component acrylic and nitrocellulose products. The putty should not be applied on materials made of polyethylene (PE) and Teflon (PTFE).
PHYSICAL PROPERTIES:
EQUIPMENT CLEANING:
Wash immediately after application with nitrocellulose thinner or thinner for acrylic products.
STORAGE CONDITIONS:
Protect the product from excessive heat and cold. Avoid direct exposure to sunlight. Store in a dry place.
SHELF LIFE:
24 months from the production date placed on the packaging.
OTHER INFORMATION:
All technical data are approximate values. We advise you to test the material to ensure suitability for your specific application. The producer reserves the right to improve the product and change the technical conditions with the possibility of making changes inside the specification.
- Density at 20°C: 1,75 – 1,90 g/cm3
- Solubility in water: very slight
- Viscosity: 180 000 – 350 000 mPa*s
- VOC content: 245 g/l (permissible: 250 g/l)
EQUIPMENT CLEANING:
Wash immediately after application with nitrocellulose thinner or thinner for acrylic products.
STORAGE CONDITIONS:
Protect the product from excessive heat and cold. Avoid direct exposure to sunlight. Store in a dry place.
SHELF LIFE:
24 months from the production date placed on the packaging.
OTHER INFORMATION:
All technical data are approximate values. We advise you to test the material to ensure suitability for your specific application. The producer reserves the right to improve the product and change the technical conditions with the possibility of making changes inside the specification.
16 other products in the same category:
