Fibre Glass Putty BOLL Fiber Car Body Filler 2X 3.6kg Van Boat Repair High Strength
£48.00
VAT included
5907588403801
Free delivery for orders over £50 (UK) & over 100€ (Ireland)
We are the car body painting accessory distributor in UK and Ireland. We are based in Northern Ireland.
We have high stock of all products so are able to prepare large wholesale orders for car painting garages anywhere in the UK and Ireland.
For any large orders or wholesale orders - please contact us.
BOLL FIBRE GLASS PUTTY
2X 3.6kg (+ hardener)
PROPERTIES:
Polyester putty reinforced with micro glass fibre is used for filling up large gaps and strengthening weakened car body elements. It has high flexibility while maintaining very high mechanical strength. It can be used on various types of primed and unprimed surfaces.
COLOUR: Green
SURFACE:
Polyester putty reinforced with micro glass fibre is used for filling up large gaps and strengthening weakened car body elements. It has high flexibility while maintaining very high mechanical strength. It can be used on various types of primed and unprimed surfaces.
COLOUR: Green
SURFACE:
- steel - degrease, grind, blow off and degrease again with "BOLL Silicone remover", then apply another coat.
- aluminium - degrease, sand down, blow off and degrease again with "BOLL Silicone remover", then apply another coat.
- old paint coatings - sand down P220-P280, blow off, degrease with "BOLL Silicone remover", and then apply the next coat.
- two-component acrylic primer - sand down P220-P280, blow off, degrease with "BOLL silicone remover" and then apply the next coat.
- polyester laminates - sand with P80-P120, blow off and degrease with "BOLL Silicone remover", then apply another coat.
EQUIPMENT CLEANING:
Wash immediately after application with nitrocellulose thinner or thinner for acrylic products.
STORAGE CONDITIONS:
Protect the product from excessive heat and cold. Avoid direct exposure to sunlight. Store in a dry place.
INFORMATION:
The putty should not be applied directly on wash primers or one-component acrylic and nitrocellulose products.
PHYSICAL PROPERTIES:
Wash immediately after application with nitrocellulose thinner or thinner for acrylic products.
STORAGE CONDITIONS:
Protect the product from excessive heat and cold. Avoid direct exposure to sunlight. Store in a dry place.
INFORMATION:
The putty should not be applied directly on wash primers or one-component acrylic and nitrocellulose products.
PHYSICAL PROPERTIES:
- density at 20°C: 1,70 – 1,90 g/cm3
- solubility in water: very slight
- viscosity: 150 000 – 300 000 mPa*s
- VOC content: 228 g/l (dopuszczalna: 250 g/l)
SHELF LIFE:
24 months from the date of production on the packaging.
OTHER INFORMATION:
All technical data are approximate values. We advise you to test the material to ensure suitability for your specific application. The producer reserves the right to improve the product and change the technical conditions with the possibility of making changes inside the specification.
24 months from the date of production on the packaging.
OTHER INFORMATION:
All technical data are approximate values. We advise you to test the material to ensure suitability for your specific application. The producer reserves the right to improve the product and change the technical conditions with the possibility of making changes inside the specification.
16 other products in the same category:
