12 x Epoxy primer BOLL 0.5L grey SPRAY anti-corrosion 500ml aerosol

PROPERTIES:
Epoxy primer spray is a one-component agent designed for the protection of various types of metal surfaces. Thanks to special epoxy resins, the primer can be used directly on sheet metal, aluminium, galvanized steel and old paints. It has great insulating, filling and anti-corrosion properties. The product is easy to work with, quick- drying and has very good adhesion to the surface. It can be covered with most paints and varnishes. The primer cab be used “wet on wet”.

COLOUR: Grey

METHOD OF USE:
Thoroughly clean, degrease, and then dry the surface. Cover adjacent areas with masking materials. Before use, shake the container well for about 3 minutes. When painting, keep the container at 15-20 cm distance from the surface. After use, invert the container and spray until the valve is empty.

SUBSTRATE:

• metal - dry sand with P120, blow and degrease with "BOLL silicone remover", and then apply another layer.
• non-ferrous metals (zinc, aluminum, copper, etc.) - sand with an abrasive finishing pad, blow and degrease with "BOLL silicone remover", and then apply another layer.
• old paint coatings - dry sand with P220 – P360, blow, degrease with "BOLL silicone remover", and then apply another layer.
• polyester putties - dry sand with P220 – P360, blow and degrease with "BOLL silicone remover", and then apply another layer.

STORAGE CONDITIONS:
Protect the product from excessive heat and cold. Avoid direct exposure to sunlight. Store in a dry place.

SHELF LIFE:
24 months from the production date placed on the packaging.

OTHER INFORMATION:
All technical data are approximate values. We advise you to test the material to ensure suitability for your specific application. The producer reserves the right to improve the product and change the technical conditions with the possibility of making changes inside the specification.