6 x Anti-Gravel SPRAY BOLL Black 500ml car body protection stone chip gravitex
£39.00
VAT included
5907588480017
Free delivery for orders over £50 (UK) & over 100€ (Ireland)
We are the car body painting accessory distributor in UK and Ireland. We are based in Northern Ireland.
We have high stock of all products so are able to prepare large wholesale orders for car painting garages anywhere in the UK and Ireland.
For any large orders or wholesale orders - please contact us.
BOLL ANTI-GRAVEL SPRAY
6 x 500ml
PROPERTIES:
The car body protection agent based on synthetic resin. It forms a flexible coating that perfectly protects against stone chips and mechanical damage. It is used to protect door sills, bumpers, spoilers and other car body parts. The product has a very high abrasion resistance (resistance against stone impacts). It can be covered with all lacquer systems.
COLOUR:
Black
METHOD OF USE:
Thoroughly clean and degrease and then dry the areas to be coated. Cover adhering surfaces with paper. Shake the container well for about 3 minutes before use. When painting, keep the container at a 15-20 cm distance from the coated surface. After use, invert the container and spray until the valve is empty.
The car body protection agent based on synthetic resin. It forms a flexible coating that perfectly protects against stone chips and mechanical damage. It is used to protect door sills, bumpers, spoilers and other car body parts. The product has a very high abrasion resistance (resistance against stone impacts). It can be covered with all lacquer systems.
COLOUR:
Black
METHOD OF USE:
Thoroughly clean and degrease and then dry the areas to be coated. Cover adhering surfaces with paper. Shake the container well for about 3 minutes before use. When painting, keep the container at a 15-20 cm distance from the coated surface. After use, invert the container and spray until the valve is empty.
SURFACE:
INFORMATION:
Do not spray toward engine, transmission, brake parts or exhaust system. CAN BE VARNISHED.
- metal - prime, sand, blow and degrease with "BOLL Silicone remover" and then apply the next coat.
- non-ferrous metals (zinc, aluminium, copper, etc. ) - prime, sand down, blow and degrease with "BOLL Silicone remover" and then apply the next coat.
- reactive primer - apply another coat when dry.
- epoxy primer - can be used to isolate materials. After sanding with P320, blow, degrease with "BOLL silicone remover" and then apply another coat.
- two-component acrylic primer - apply varnish or control powder. After sanding P240-P320, blow, degrease with "BOLL silicone remover" and then apply another coat.
- polyester putties - sand P20-P320, blow and degrease with "BOLL Silicone remover", then apply another coat.
INFORMATION:
Do not spray toward engine, transmission, brake parts or exhaust system. CAN BE VARNISHED.
PHYSICAL PROPERTIES:
Physical state: aerosol
Boiling point: - 42°C
STORAGE CONDITIONS:
Protect the product from excessive heat and cold. Avoid direct exposure to sunlight. Store in a dry place.
SHELF LIFE:
Two years from the production date on the packaging.
OTHER INFORMATION:
All technical data are approximate values. We advise you to test the material to ensure suitability for your specific application. The producer reserves the right to improve the product and change the technical conditions with the possibility of making changes inside the specification.
Physical state: aerosol
Boiling point: - 42°C
STORAGE CONDITIONS:
Protect the product from excessive heat and cold. Avoid direct exposure to sunlight. Store in a dry place.
SHELF LIFE:
Two years from the production date on the packaging.
OTHER INFORMATION:
All technical data are approximate values. We advise you to test the material to ensure suitability for your specific application. The producer reserves the right to improve the product and change the technical conditions with the possibility of making changes inside the specification.
16 other products in the same category:
