6 x Anti-Gravel Boll Black 1kg car body protection stone chip gravitex + gun
£49.99
VAT included
5907588410526
Free delivery for orders over £50 (UK) & over 100€ (Ireland)
We are the car body painting accessory distributor in UK and Ireland. We are based in Northern Ireland.
We have high stock of all products so are able to prepare large wholesale orders for car painting garages anywhere in the UK and Ireland.
For any large orders or wholesale orders - please contact us.
BOLL ANTI-GRAVEL + GUN
6pcs x 1kg
PROPERTIES:
The car body protection agent based on the highest quality synthetic resins, protecting against mechanical and atmospheric factors. Thanks to its recipe (HS quality), it allows you to obtain the "OEM anti-gravel" effect. It is used to protect door sills, bumpers, spoilers and other car body parts. The product has a very high abrasion resistance (protection against stone impacts). It can be covered with all paint systems
COLOUR:
Black
METHOD OF USE:
The car body protection agent can be easily applied with BOLL universal spray gun. Thoroughly clean, degrease and then dry the surface. Cover adjacent areas with masking materials.
The car body protection agent based on the highest quality synthetic resins, protecting against mechanical and atmospheric factors. Thanks to its recipe (HS quality), it allows you to obtain the "OEM anti-gravel" effect. It is used to protect door sills, bumpers, spoilers and other car body parts. The product has a very high abrasion resistance (protection against stone impacts). It can be covered with all paint systems
COLOUR:
Black
METHOD OF USE:
The car body protection agent can be easily applied with BOLL universal spray gun. Thoroughly clean, degrease and then dry the surface. Cover adjacent areas with masking materials.
SURFACE:
INFORMATION:
Do not spray toward engine, transmission, brake parts or exhaust system. CAN BE VARNISHED.
- metal - prime, sand, blow and degrease with "BOLL Silicone remover" and then apply the next coat.
- non-ferrous metals (zinc, aluminium, copper, etc. ) - prime, sand down, blow and degrease with "BOLL Silicone remover" and then apply the next coat.
- reactive primer - apply another coat when dry.
- epoxy primer - can be used to isolate materials. After sanding with P320, blow, degrease with "BOLL silicone remover" and then apply another coat.
- two-component acrylic primer - apply varnish or control powder. After sanding P240-P320, blow, degrease with "BOLL silicone remover" and then apply another coat.
- polyester putties - sand P120-P320, blow and degrease with "BOLL Silicone remover", then apply another coat.
INFORMATION:
Do not spray toward engine, transmission, brake parts or exhaust system. CAN BE VARNISHED.
PHYSICAL PROPERTIES:
Density (at 20°C): 1,40 g/cm3
EQUIPMENT CLEANING:
Wash the gun with nitrocellulose solvent (Nitro) or white spirit.
STORAGE CONDITIONS:
Protect the product from excessive heat and cold. Avoid direct exposure to sunlight. Store in a dry place.
SHELF LIFE:
Two years from the production date on the packaging.
OTHER INFORMATION:
All technical data are approximate values. We advise you to test the material to ensure suitability for your specific application. The producer reserves the right to improve the product and change the technical conditions with the possibility of making changes inside the specification.
Density (at 20°C): 1,40 g/cm3
EQUIPMENT CLEANING:
Wash the gun with nitrocellulose solvent (Nitro) or white spirit.
STORAGE CONDITIONS:
Protect the product from excessive heat and cold. Avoid direct exposure to sunlight. Store in a dry place.
SHELF LIFE:
Two years from the production date on the packaging.
OTHER INFORMATION:
All technical data are approximate values. We advise you to test the material to ensure suitability for your specific application. The producer reserves the right to improve the product and change the technical conditions with the possibility of making changes inside the specification.
16 other products in the same category:
-30%
