Universal Filler BOLL 750g UNI putty professional car repair body filler
£4.50
VAT included
5907588403856
Free delivery for orders over £50 (UK) & over 100€ (Ireland)
We are the car body painting accessory distributor in UK and Ireland. We are based in Northern Ireland.
We have high stock of all products so are able to prepare large wholesale orders for car painting garages anywhere in the UK and Ireland.
For any large orders or wholesale orders - please contact us.
UNIVERSAL PUTTY BOLL
750g
BOLL UNIVERSAL PUTTY
Universal polyester putty for filling both big and small decrements. Perfect for both mechanical and manual grinding. Suitable flexible with very good adherence to different surfaces.
PROPERTIES:
Universal polyester putty for filling both large and small defects. Perfectly suited for mechanical and manual sanding. It has proper flexibility and very good adhesion to various types of primed and unprimed surfaces.
COLOUR:
light yellow
Universal polyester putty for filling both big and small decrements. Perfect for both mechanical and manual grinding. Suitable flexible with very good adherence to different surfaces.
PROPERTIES:
Universal polyester putty for filling both large and small defects. Perfectly suited for mechanical and manual sanding. It has proper flexibility and very good adhesion to various types of primed and unprimed surfaces.
COLOUR:
light yellow
SURFACE:
INFORMATION:
The putty should not be applied directly on wash primers or one-component acrylic and nitrocellulose products.
- steel - degrease, sand, blow and degrease again with "BOLL Silicone remover", then apply another coat.
- aluminium - degrease, sand, blow and degrease again with "BOLL Silicone remover", then apply another coat.
- old paint coatings - sand with P220-P280, blow, degrease with "BOLL Silicone remover", then apply the next coat.
- two-component acrylic primer - sand with P220-P280, blow, degrease with "BOLL silicone remover", then apply the next coat.
- polyester laminates - sand with P80-P120, blow and degrease with "BOLL Silicone remover", then apply another coat.
INFORMATION:
The putty should not be applied directly on wash primers or one-component acrylic and nitrocellulose products.
PHYSICAL PROPERTIES:
EQUIPMENT CLEANING:
Wash immediately after application with nitrocellulose thinner or thinner for acrylic products.
STORAGE CONDITIONS:
Protect the product from excessive heat and cold. Avoid direct exposure to sunlight. Store in a dry place.
SHELF LIFE:
24 months from the production date on the packaging.
OTHER INFORMATION:
All technical data are approximate values. We advise you to test the material to ensure suitability for your specific application. The producer reserves the right to improve the product and change the technical conditions with the possibility of making changes inside the specification.
- Density at 20°C: 1,80 – 1,90 g/cm3
- Solubility in water: very slight
- Viscosity: 300 000 – 450 000 mPa*s
- VOC content: 206 g/l (permissible: 250 g/l)
EQUIPMENT CLEANING:
Wash immediately after application with nitrocellulose thinner or thinner for acrylic products.
STORAGE CONDITIONS:
Protect the product from excessive heat and cold. Avoid direct exposure to sunlight. Store in a dry place.
SHELF LIFE:
24 months from the production date on the packaging.
OTHER INFORMATION:
All technical data are approximate values. We advise you to test the material to ensure suitability for your specific application. The producer reserves the right to improve the product and change the technical conditions with the possibility of making changes inside the specification.
16 other products in the same category:
