BOLL Spray Putty polyester filler + hardener + thinner KIT 1.2kg
£15.19
VAT included
5907588404525
Free delivery for orders over £50 (UK) & over 100€ (Ireland)
We are the car body painting accessory distributor in UK and Ireland. We are based in Northern Ireland.
We have high stock of all products so are able to prepare large wholesale orders for car painting garages anywhere in the UK and Ireland.
For any large orders or wholesale orders - please contact us.
BOLL Spray Putty
1.2kg
PROPERTIES:
Product designed for finishing works on various surfaces. It is ideal for use over many types of polyester fillers and a range of metals. It provides a perfectly smooth surface after initial sanding. Suitable for application with a spray gun, including on vertical surfaces.
The filler is sold as a set with a hardener and thinner.
COLOUR:
Grey
Product designed for finishing works on various surfaces. It is ideal for use over many types of polyester fillers and a range of metals. It provides a perfectly smooth surface after initial sanding. Suitable for application with a spray gun, including on vertical surfaces.
The filler is sold as a set with a hardener and thinner.
COLOUR:
Grey
SURFACE:
INFORMATION:The putty should not be applied directly on wash primers or one-component acrylic and nitrocellulose products.
- steel - degrease, sand with P80-P120, blow, and degrease again with "BOLL silicone remover", then apply another coat.
- aluminium - degrease, sand with BOLL abrasive cloth, blow, and degrease again with "BOLL silicone remover", then apply the next coat.
- old paint coatings - sand with P220-P280, blow off, and degrease with "BOLL Silicone
remover", then apply the next coat. - two-component acrylic primer - sand with P220-P280, blow, and degrease with "BOLL
silicone remover", then apply the next coat. - polyester putties - sand with P240, blow, and degrease with "BOLL Silicone remover", then apply another coat.
INFORMATION:The putty should not be applied directly on wash primers or one-component acrylic and nitrocellulose products.
PHYSICAL PROPERTIES:
Density (at 20°C): 1,55 – 1,65 g/cm3
Solubility in water: very slight
Viscosity: 4 000 – 7 000 mPa*s
VOC content: 539,5 g/l
EQUIPMENT CLEANING:
Wash immediately after application with nitrocellulose thinner or thinner for acrylic products.
STORAGE CONDITIONS:
Protect the product from excessive heat and cold. Avoid direct exposure to
sunlight. Store in a dry place.
SHELF LIFE:
24 months from the production date placed on the packaging.
OTHER INFORMATION:All technical data are approximate values. We advise you to test the material to ensure suitability for your specific application. The producer reserves the right to improve the product and change the technical conditions with the possibility of making changes inside the specification
Density (at 20°C): 1,55 – 1,65 g/cm3
Solubility in water: very slight
Viscosity: 4 000 – 7 000 mPa*s
VOC content: 539,5 g/l
EQUIPMENT CLEANING:
Wash immediately after application with nitrocellulose thinner or thinner for acrylic products.
STORAGE CONDITIONS:
Protect the product from excessive heat and cold. Avoid direct exposure to
sunlight. Store in a dry place.
SHELF LIFE:
24 months from the production date placed on the packaging.
OTHER INFORMATION:All technical data are approximate values. We advise you to test the material to ensure suitability for your specific application. The producer reserves the right to improve the product and change the technical conditions with the possibility of making changes inside the specification
16 other products in the same category:
