NOVOL COBRA BED LINER 2 BOTTLE KIT - BLACK - Tough Bedliner Coating

COBRA TRUCK BEDLINER COBRA TRUCK BEDLINER forms a structural, scratch-resistant co- ating. Protects against petrol, oil, water and salt. The product also has sound-proof and sound-dampening properties. It is UV re- sistant. Based on synthetic resins, it does not contain asphalt or bitumen compounds, and can be coated with any acrylic paints.

Structural protective coating:

• very high mechanical strength and scratch resistance
• ensures high resistance to adverse weather conditions (moisture, high temperature, frost, UV radiation, salt)
• versatile application in all-terrain vehicles, lorries, agricultural machinery, tractors, construction equipment, gardening equipment, etc.
• structural effect with semi-matt finish
• possibility to obtain various structures depending on the method of application
• using COBRA anti-slip additive reduces the risk of fall, e.g. on all-terrain and commercial vehicle platforms, stairs, etc.
• quick and easy application
• excellent visual effect

SUBSTRATES:

• TWO-COMPONENT ACRYLIC PRIMERS - Dry sand, finish level with P240 - P320, blow off the dust and degrease.
• POLYESTER PUTTIES - Dry sand, finish level with P240 - P320, blow off the dust and degrease.
• TWO-COMPONENT EPOXY PRIMERS - No sanding for up to 12 hours, sand with P320 afterwards, blow off the dust and degrease.
• STEEL - Apply on the epoxy, acrylic primers or the existing layer of the 2K coat when sanded down.
• STAINLESS STEEL - Apply on the epoxy, acrylic primers or the existing layer of the 2K coat when sanded down.
• WASH PRIMERS - Apply after drying.
• PLASTICS - Degrease with PLUS 780, matt with an abrasive finishing pad, degrease again. Apply the PLUS 700 Adhesion Increasing Agent.
• POLYESTER LAMINATES - Degrease, dry sand with P280, blow off the dust and degrease again.
• 1K PRODUCTS - Do not apply on one-component products.

APPLICATION CONDITIONS:
It is recommended to apply the product at over 150C and humidity of 60% or lower. The COBRA Truck Bedliner can produce a texture that depends on the spray gun type, nozzle size and thinning ratio.

HYDRODYNAMIC SPRAY:
COBRA Truck Bedliner can be applied using the hydrodynamic spray method. Application parameters should comply with the equipment manufacturers’ guidelines. This method allows for achieving medium and fine textures.

ROLLER APPLICATION:
If you don’t have access to a professional workshop with a compressor, Cobra Truck Bedliner can also be applied with a roller. The 2 specially selected rollers make it easy to paint and produce different textures similar to the effect of spray gun.

COATABILITY:

• COBRA is coatable with basecoats, clearcoats and topcoats.
• Wait a minimum of 3 hours before covering with subsequent layers. Sand/matt the topcoat after 24 hours after applying COBRA. Use a scuff pad or sand paper. Next, degrease with PLUS 780.

EQUIPMENT CLEANING:
THIN 850 acrylic thinner or NC solvent.

STORAGE CONDITIONS:
Store in a cool dry room, away from sources of fire and heat. Avoid direct exposure to sunlight.

SHELF LIFE:
COBRA Black / COBRA for Color - 24 months/20°C
Hardener - 24 months/20°C
THIN 850 - 24 months/20°C

COLOUR:
black